Design of Compact Pre-Pregger Machine for In House Production of Pre-Preg Material

  • M.A. A Rahman
  • N.R Mohamad
  • Z. Mustafa
  • S. Ismail
  • A.A. Abdul Rahman
  • S. Abdullah
  • E. Mohamad
  • M.H. Nordin
  • M.R Salleh

Abstract


The main idea of this project is to conceptually design and simulate a lab-scale pre-pregger machine for in house production of pre-preg material. The aim is to decrease the size of the existing machine and reduce the cost to fabricate it. The concept design of the machine focuses on four major components: drum, resin bath, guider and fiber spindle. The pre-pregger machine is designed with an adaptable drum parameter which can be installed and removed easily from the drum holder. In this project, Programmable Logic Controller (PLC) was used to control the pre-pregger machine. The CX-ONE OMRON PLC was chosen to design the ladder diagram of the controller. In order to simulate and test the correctness of the controller, a simple electrical setup has been made. The setup consists of three motors, few sensors and push button. The simulated setup proved that the proposed conceptual design of the pre-pregger machine is workable.

Downloads

Download data is not yet available.

References

S.K. Mazumdar, Composites Manufacturing Materials, Product, and Process Engineering. Florida: CRC Press, 2002.

E.J. Barbero, Introduction to Composite Materials Design - Second Edition. Florida: CRC Press, 2010.

G. Akovali, Handbook of Composite Fabrication. Shropshire, UK: Rapra Technology Ltd., 2001.

M.K. Milauskas. (2017). Bridging the Gap Between Art & Technology with Carbon FiberComposite Processes [Online]. Available: http://www.composites-by-design.com/carbon-fiber-design/

C.A. Litzler. (2017). Hot Melt Prepreg Systems [Online]. Available: http://www.waeco1.com/home/prepreg-machines/

N.A. Siddiqui, S.U. Khan, P.C. Ma, C.Y. Li and J.K. Kim, “Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes,” Composites. Part A, Applied Science and Manufacturing, vol. 42, no. 10, pp. 1412-1420, Oct 2011.

G.P. Thomas (2013). Composite Prepregs – Manufacturing, Benefits and Applications [Online]. Available: https://www.azom.com/article.aspx?ArticleID=8353#

Mikrosam Corp. (2017). Drum Winding Machine MDW 100 2 [Online]. Available: http://www.mikrosam.com/new/article/en/drum-winding-machine-mdw-1002/ Mikrosam

R. Stewart, “New prepreg materials offer versatility, top performance,” Reinforced Plastics, vol. 53, no. 5, pp. 28-33, 2009.

J. Sloan. (2013). In-house prepregging: Cost benefit calculus Composites World [Online]. Available: https://www.compositesworld.com/articles/(597)

W.G. McClean. (2017). Resin Baths: Designed for impregnating & metering the resin-to-fiber ration [Online]. Available: http://www.mccleananderson.com/index.cfm?pid=14&Mc Clean Anderson.

J. Heth. (2000). From Art to Science: A Prepreg Review [Online]. Available: www.hpcomposites.com

M. Zhou, H. Wan, R. Wang, X. Song, C. Su, M. Gu, and J. Sun, “Formal component-based modeling and synthesis for PLC systems”, Computers in Industry, vol. 64, no. 8, pp. 1022–1034, 2013.

E. Yilmaz and S. Katrancioglu “Designing Programmable Logic Controller (PLC) Experiment Set with Internal Experiment Blocks”, Procedia - Social and Behavioral Sciences, vol. 28, pp. 494–498, 2011.

V. Hajarnavis and K. Young, "An investigation into programmable logic controllersoftware design techniques in the automotive industry", Assembly Automation, vol. 28, no. 1, pp.43-54, 2008.

Y. I. Al. Mashhadany, “Design and Implementation of Electronic Control Trainer”, Intelligent control and Automation, vol. 3, pp. 222–228, 2012.

How to Cite
A Rahman, M., Mohamad, N., Mustafa, Z., Ismail, S., Abdul Rahman, A., Abdullah, S., Mohamad, E., Nordin, M., & Salleh, M. (1). Design of Compact Pre-Pregger Machine for In House Production of Pre-Preg Material. Journal of Advanced Manufacturing Technology (JAMT), 12(1(2), 437-450. Retrieved from https://jamt.utem.edu.my/jamt/article/view/4303
Section
Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>