SIMULTANEOUS TWIN CUTTER TECHNIQUE FOR MACHINING THIN WALL LOW RIGIDITY PART

  • R. Izamshah
  • H. Affendi
  • J.P.T. Mo School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Plenty Road, Melbourne, VIC 3083, Australia.
  • M.S. Kasim
  • S. Ding School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Plenty Road, Melbourne, VIC 3083, Australia.
  • N. Mohamad
  • P.J. Liew
  • M.A. Ali
  • S.A. Sundi
  • M.K. Sued

Abstract


Machining of low rigidity components such as aerospace monolithic part poses several challenges. In common manufacturing practice, the wall thickness is further reduced by peripheral milling that lead to surface dimensional error resulting in tolerance violation. The surface errors are mainly induced by the acts of cutting force, which deflect the wall on the opposite direction. Additional post machining process are generally employ to compensate with the excessive error that leads to increase the production cost. Therefore, this paper aim to solve the discrepancies with the current techniques by using a simultaneous twin cutter machining technique. An in-house twin cutter adapter has been developed to transmit the rotation from the machine spindle. A set of machining test was performed to assess the effectiveness of the propose technique. The results indicated that the deflection of the thin wall part can be neglected and hence minimize the surface errors since the same cutting forces acts on both opposite sides of the wall surface. In addition, the proposed technique able to reduce the machining time up to 50 percent as the wall structure are machined with only one single pass.

Downloads

Download data is not yet available.

References

Y. Altintas and E. Budak, “Analytical Prediction of Stability Lobes in Milling”, Annals of CIRP, vol. 44, no. 1, pp. 357-362, 1995.

Y. Altintas and E. Budak, “Analytical Prediction of Chatter Stability Conditions for Multi-Degree of Freedom Systems in Milling”, Transactions of ASME Journal of Dynamic Systems, Measurement and Control, vol. 120, pp. 22-36, 1998.

S. Ratchev, S. Liu and A.A. Becker, “Error compensation strategy in milling flexible thin-wall parts”, Journal of Materials Processing Technology, vol. 162-163, pp. 673-681, 2005.

Y. Altintas, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. Cambridge: Cambridge University Press, 2000.

K.G. Ahn, B.K. Min and Z.J. Pasek, “Modeling and compensation of geometric errors in simultaneous cutting”, The International Journal of Advanced Manufacturing Technology, vol. 29, no. 9-10, pp. 929–939, 2006.

S. Ratchev, W. Huang, S. Liu and A.A. Becker, “Milling error prediction and compensation in machining of low-rigidity parts”, International Journal of Machine Tools and Manufacture, vol. 44, no. 15, pp. 1629-1641, 2004.

R. Izamshah, M. Zulhairy, M.S. Kasim, M. Hadzley, M.A. Md Ali and M.A. Sulaiman, “Cutter path strategies for shoulder milling of thin deflecting walls”, Advanced Materials Research, vol. 903, pp. 175-180, 2014.

M.S. Kasim, C.H. Che Haron, J.A. Ghani, M.A. Azam, R. Izamshah, M.A. Md Ali and M.S. Aziz, “The influence of cutting parameter on heat generation in high-speed milling Inconel 718 under MQL condition”, Journal of Scientific & Industrial Research, vol. 73, pp. 62-65, 2014.

S.L. Ding, R.A. Izamshah, J. Mo and Y.W. Zhu, “Chatter detection in high speed machining of titanium alloys”, Key Engineering Materials, vol. 458, pp. 289-294, 2011.

P. Zelinski. (2003). When Two Spindles Are Better Than One [Online]. Available: http://www.mmsonline.com/articles/when-two-spindles-are-better-than-one

Q. Yan, M. Luo and K. Tang, “Multi-axis variable depth-of-cut machining of thin-walled workpieces based on the workpiece deflection constraint”, Computer Aided Design, vol. 100, no. 1, pp. 14-29, 2018.

M. Calabrese, T. Primo and A. Del Prete, “Optimization of machining fixture for aeronautical thin-walled components”, Procedia CIRP, vol. 60, pp. 32-37, 2017.

M. Masmali and P. Mathew, “An analytical approach for machining thin-walled workpieces”, Procedia CIRP, vol. 58, pp. 187-192, 2017.

S. Ren, X. Long and G. Meng, “Dynamics and stability of milling thin walled pocket structure”, Journal of Sound and Vibration, vol. 429, pp. 325-347, 2018.

Z. Zhao, L. Hongguang, L. Xianbo, Z. Wanyu and M. Guang, “Chatter mitigation for the milling of thin-walled workpiece”, International Journal of Mechanical Sciences, vol. 138-139, pp. 262-271, 2018.

How to Cite
Izamshah, R., Affendi, H., Mo, J., Kasim, M., Ding, S., Mohamad, N., Liew, P., Ali, M., Sundi, S., & Sued, M. (1). SIMULTANEOUS TWIN CUTTER TECHNIQUE FOR MACHINING THIN WALL LOW RIGIDITY PART. Journal of Advanced Manufacturing Technology (JAMT), 12(1(4), 39-50. Retrieved from https://jamt.utem.edu.my/jamt/article/view/4896
Section
Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>