Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping

  • A. Ishak
  • E. Mohamad
  • L. Sukarma
  • M.S. Salleh
  • M.R. Salleh
  • N.A. Mohamad
  • R.I.R. Abdullah
  • M.A.M. Ali

Abstract


This study aims to determine the manner in which the Cleaner Production (CP) sustainability measures would be embedded into the altered Value Stream Mapping (VSM), which is a Lean Manufacturing tool. The typical VSM technique does not consider the societal and the environmental metrics that are imperative for determining the sustainability for any production line. Additionally, the Guidelines for Green Industry Auditor, 2014, published by the Department of Environment, Malaysia, have made no mention regarding the proper lean tools which need to be applied to the audit systems as per the USEPA for improving the system. The VSM ability to determine the environmental, economic and societal performance would help VSM be a useful tool. Also, many companies can apply the data generated in a better manner and change their operations to fit the technology for improving the manufacturing. This paper has presented a CP implementation with the help of a VSM technology, based on the earlier literature. One pilot case study has been conducted in the local e-Waste Recovery Plant, ABC Sdn. Bhd., which demonstrated that this VSM approach, could capture the environmental, economic and societal sustainability for a specific process and has also, recommended some future researches.

Downloads

Download data is not yet available.

References

L.C. Angell and H.S. Lewis, “Environmental and operations management face the future”, Decision line, pp. 9-11, 1999.

M.O. Saeed, M.N. Hassan and M.A. Mujeebu, “Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur, Malaysia”, Waste Management, vol. 29, no.7, pp. 2209-2213, 2009.

Perunding Good Earth (PGE), “The E-waste inventory project in Malaysia,” Department of Environment, Malaysia and EX-Corporation, Japan, 2009.

Department of Environment (DOE), Guidelines for the Classification of Used Electronic and Electrical Equipment in Malaysia, 1st edition. Malaysia, 2008.

B.R. Babu, A.K. Parade and C.A. Basha, “Electrical and electronic waste: A global environmental problem”, Waste Management and Research, vol. 25, no.4, pp. 307-318, 2007.

J. Frijns and B. Van Vliet, “Small-scale industry and cleaner production strategies”, World Development, vol. 27, no.6, pp. 967–983, 1999.

G. Hilson, “Pollution prevention and cleaner production in the mining industry: An analysis of current issues”, Journal of Cleaner Production, vol. 8, no.2, pp.119–126, 2000.

J. Womack and D. Jones, Lean Thinking. New York: Simon & Schuster, 1996.

S. Bushell, J. Mobley and B. Shelest, “Discovering lean thinking at progressive healthcare”, The Journal for Quality and Participation, vol. 25, no. 2, pp. 20–25, 2002.

P. Rao, “Greening production: A south-east Asian experience”, International Journal of Operations and Production Management, vol. 24, no.3, pp.289–320, 2004.

F. Abdulmalek and J. Rajgopal, "Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study", International Journal of Production Economics, vol. 107, no.1, pp. 223–236, 2007.

J. Womack, D. Jones and D. Roos, “The Machine That Changed the World: The Story of Lean Production”, New York: Harper Perennial, 1991.

M. Braglia, G. Carmignani and F. Zammori, "A new value stream mapping approach for complex production systems", International Journal of Production Research, vol. 44, no.18-19, pp. 3929-3952, 2006.

M. Rother and J. Shook, “Learning to see: Value Stream Mapping to add and Eliminate Muda”, The Lean Enterprise Institute, Massachusetts, 2003.

USEPA, “The Lean and Environment Toolkit”, United States Environmental Protection Agency, 2007.

R. Rahim and A.A. Abdul Raman, “Cleaner production implementation in a fruit juice production plant”, Journal of Cleaner Production, vol.101, pp.215-221, 2015.

G. Kuriger and F.F. Chen, “Lean and green: A current state view,” in the Proceeding of the 2010 Industrial Engineering Research Conference, Cancun, Mexico, 2010.

G. Kuriger, Y. Huang and F. Chen, “A lean sustainable production assessment tool”, in the Proceeding of the 44th CIRP Conference on Manufacturing Systems, Madison, Wisconsin, 2011.

A. Torres and A. Gati, “Environmental value stream mapping (EVSM) as sustainability management tool”, in the Proceeding of Portland International Center for Management of Engineering and Technology Conference, Portland, Oregon, 2009.

D. Simons and R. Mason, “Environmental and transport supply chain evaluation with sustainable value stream mapping”, 7th Logistics Research Network Conference, Birmingham, United Kingdom, 2002.

A. Fearne, K. Waldron and A. Norton, “Sustainable value stream mapping in the food industry,” In: ed. Handbook of Waste Management and Co-Product Recovery in Food Processing, Woodhead Publishing, Cambridge, 2009.

A. Norton, “Sustainable value stream mapping as a technique for analysing and reducing waste in the UK chilled food sector,” PhD Thesis, Centre for Environmental Policy, Imperial College, University of London, 2007.

J.B. Guinee, “Handbook on Life Cycle Assessment: Operational Guide to the ISO Standards”, The international journal of life cycle assessment , vol.7, no.5,pp.311-313,2002

M. Paju, J. Heilala, M. Hentual, A. Heikkila, B. Johansson, S. Leong and S. Lyons, “Frameworkand indicators for a sustainable manufacturing mapping methodology”, in the Proceeding of the 2010 Winter Simulations Conference, Baltimore, Maryland, 2010.

W. Faulkner, W. Templeton, D. Gullett and F. Badurdeen, "Visualizing sustainability performance of manufacturing systems using sustainable value stream mapping (Sus-VSM)", in the Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, 2012.

How to Cite
Ishak, A., Mohamad, E., Sukarma, L., Salleh, M., Salleh, M., Mohamad, N., Abdullah, R., & Ali, M. (1). Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal of Advanced Manufacturing Technology (JAMT), 12(1(2), 55-68. Retrieved from https://jamt.utem.edu.my/jamt/article/view/4269
Section
Articles

Most read articles by the same author(s)

1 2 3 > >>