MICROSTRUCTURE AND PHASE OF POLY(VINYLIDEN FLUORIDE) FILMS BY ELECTROPHORETIC DEPOSITION: EFFECT OF POLYMER DISPERSION’S STIRRING CONDITIONS

  • Kok Tee Lau Universiti Teknikal Malaysia Melaka
  • Mohd Shahadan Mohd Suan
  • M. Zaimi
  • Jeefferie Abd Razak
  • M.A. Azam
  • N. Mohamad

Abstract


Electrophoretic deposition (EPD) technique had been applied to conformally deposit piezoelectric PVDF film on the uneven surface target. Nevertheless, optimization of polymer dispersion preparation process is crucial to achieve an even and uniform PVDF film. Sedimentation test showed PVDF polymer dispersions are more stable and well-dispersed in DMF than in MEK. Higher stirring temperature and shorter stirring time in MEK further decreased the PVDF dispersion stability and produced higher degree of agglomerated PVDF chain. As a result, MEK-based dispersion produced thick and fully coverage films,. Whereas, the DMF-based dispersions produced thin but partial coverage films. Thus, the degree of dispersibility of the PVDF dispersions has a profound influence on the deposited films’ microstructure. FTIR spectra indicates presences of electroactive b phase in DMF-derived deposit, and mixture of a and b phases in the MEK-derived films.

Downloads

Download data is not yet available.

Author Biography

Kok Tee Lau, Universiti Teknikal Malaysia Melaka

Faculty of Manufacturing Engineering

Published
2016-12-28
How to Cite
Lau, K. T., Mohd Suan, M. S., Zaimi, M., Abd Razak, J., Azam, M., & Mohamad, N. (2016). MICROSTRUCTURE AND PHASE OF POLY(VINYLIDEN FLUORIDE) FILMS BY ELECTROPHORETIC DEPOSITION: EFFECT OF POLYMER DISPERSION’S STIRRING CONDITIONS. Journal of Advanced Manufacturing Technology (JAMT), 10(2), 57-66. Retrieved from https://jamt.utem.edu.my/jamt/article/view/953
Section
Articles

Most read articles by the same author(s)

<< < 1 2