Modeling and Simulation Affect of Binder Addition Rate on Ammonia Emission During Granulation Process

  • N. Mohamad ICEI 2016 Committee, Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Melaka.
  • D. Shafeeq
  • A. Shaaban
  • M.A. Nurhuda


This paper presents the modeling and simulation of binder addition in Fluidized bed granulator in order to quantify the amount of ammonia (NH3) gas release. The model development is based on experimental observations using MATLAB 12b with the ability of combining expert knowledge with mapping of experimental data sets is expected to establish a robust model which then taken up for process optimization and control the ammonia emission. 


Download data is not yet available.


. M. Potthoff, Ammonia Emission Reduction in Urea Granulation Plants.2012.

. S. Lisa, Studies on Effect of Process Parameters on Particle Growth in a Fluidized Bed Granulator. 2012.

. B. Rambali, L. Baert, and D. L. Massart, ‚Using experimental design to optimize the process parameters in fluidized bed granulation on a semi-full scale.,‛ Int. J. Pharm., vol. 220, no. 1–2, pp. 149–60, Jun. 2001.

. Tejas B Patel et. al, ‚Influence of Process Variables On Physicochemical Properties of the Granulation Mechanism of Diclofenac Sodium in Fluid Bed Granulation,‛ Int. J. Pharm., vol. 3, no. 1–2, pp. 149–60, Aug. 2010.

. F. Mariani, C. N. Grimaldi, and M. Battistoni, ‚Diesel engine NOx emissions control: An advanced method for the O2 evaluation in the intake flow,‛ Appl. Energy, vol. 113, pp. 576–588, Jan. 2014.

. D. Niu, M. Li, and F. Wang, ‚Optimization of fluidized bed spray granulation process based on a multiphase hybrid model,‛ Chemom. Intell. Lab. Syst., vol. 131, pp. 7–15, Feb. 2014.

. A. Faure, P. York, and R. C. Rowe, ‚Process control and scale-up of pharmaceutical wet granulation processes: a review.,‛ Eur. J. Pharm. Biopharm., vol. 52, no. 3, pp. 269–77, Nov. 2001.

. F. Duan, Z. Jin-Peng, C. Chien-Song, W. Yuan-Jie and T. Jim, "Combustion of crushed and pelletized peanut shells in a pilot-scale fluidized-bed combustor with flue gas recirculation," Elsevier, p. 8, 2014.

. S. Brahmotri, The effect of parameters on the performance of a Fluidized bed reactor and Gasifier. Rourkela, 2011.

. H. M. Monayem, Development of a Simulation Model for Fluidized Bed Mild Gasifier. 2010.

. E. Henrik, L. Anchang, R. Heikki, H. Juha, A. O, A. S, H. J, L. H and Y. J, "Granule size control and targeting pulsed spray fluid bed granulation," Elsevier, p. 7, 2009.

. K. J. Esko, Intelligent modelling of a fluidized bed granulator used in production of pharmaceuticals. p. 8, 2009.

. M. G. N, A. H. M and M. M. I, "The Use of Simulink Block Diagram to Solve Mathematical Models and Control Equations," Universitas Scientarium, p. 9, 2003.

How to Cite
Mohamad, N., Shafeeq, D., Shaaban, A., & Nurhuda, M. (2017). Modeling and Simulation Affect of Binder Addition Rate on Ammonia Emission During Granulation Process. Journal of Advanced Manufacturing Technology (JAMT), 11(1), 69-76. Retrieved from