THE EFFECT OF LAYER THICKNESS AND RASTER ANGLES ON TENSILE STRENGTH AND FLEXURAL STRENGTH FOR FUSED DEPOSITION MODELING (FDM) PARTS

  • Z. Abdullah
  • H.Y. Ting
  • M.A.M. Ali
  • M.H.F.M. Fauadi
  • M.S. Kasim
  • A. Hambali
  • M. M. Ghazaly
  • F. Handoko National Institute of Technology (ITN) Malang, Jl. Bend. Sigura - Gura Barat Raya No.2, Sumbersari, Kec. Lowokwaru, Kota Malang, Jawa Timur 65152, Indonesia.

Abstract


Additive manufacturing(AM) technologies using Fused Deposition Modeling (FDM) is one of the most popular method and is widely used for prototyping and production application. However, the quality of parts produced with FDM can be affected by various process parameters used. Therefore, this study aims to examine the effect of and layer thickness and raster angle on mechanical properties of FDM parts. All the test specimens were built by using Folger Tech 3D printer with two materials which are ABS and PLA. ASTM D638 and D790 standard were followed to carry out the tensile test and flexural test to determine the mechanical properties of tensile strength, and flexural strength. The influence of the layer thickness and raster angle on tensile strength and flexural strength is determine using Analysis of variance (ANOVA). The results show that the variables layer thickness and raster angle affect the flexural strength more than these variables affect the tensile strength of the test specimen. Contrary to the common results, the specimen fabricated using PLA material has higher strength compared to ABS material in this study.

Downloads

Download data is not yet available.

References

N. Guo and M.C. Leu, “Additive manufacturing: Technology, applications and research needs”, Frontiers of Mechanical Engineering, vol. 8, no. 3, pp. 215–243, 2013.

B.P. Conner, G.P. Manogharan, A.N. Martof, L.M. Rodomsky, C.M. Rodomsky, D.C. Jordan and J.W. Limperos, “Making sense of 3-D printing: creating a map of additive manufacturing products and services”, Additive Manufacturing, vol. 1, pp. 64–76, 2014.

W. Wu, P. Geng, G. Li, D. Zhao, H. Zhang and J. Zhao, “Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS”, Materials, vol. 8, no. 9, pp. 5834–5846, 2015.

O.A. Mohamed, S.H. Masood, and J.L. Bhowmik, “Optimization of fused deposition modeling process parameters: a review of current research and future prospects”, Advances in Manufacturing, vol. 3, no. 1, pp. 42–53, 2015.

A. Lanzotti, M. Grasso, G. Staiano and M. Martorelli, “The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer", Rapid Prototyping Journal, vol. 21, no. 5, pp. 604-617, 2015.

A. Lanzotti, M. Martorelli, and G. Staiano, “Understanding Process Parameter Effects of RepRap Open-Source Three-Dimensional Printers Through a Design of Experiments Approach”, Journal Manufacturing Science Engineering, vol. 137, no. 1, pp. 11017-1 - 11017-7, 2015.

K. G. J. Christiyan, U. Chandrasekhar, and K. Venkateswarlu, “A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite”, IOP Conference Series: Materials Science and Engineering, vol. 114, no. 1, pp. 1-8, 2016.

A.K. Sood, R.K. Ohdar, and S.S. Mahapatra, “Parametric appraisal of mechanical property of fused deposition modelling processed parts”, Material Design, vol. 31, no. 1, pp. 287–295, 2010.

T. Letcher and M. Waytashek, “Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer,” in ASME International Mechanical Engineering Congress and Exposition, Quebec, 2014, pp. 1- 8.

Subcommittee D20.10. (2014). ASTM D638-14. Standard Test Method for Tensile Properties of Plastics [Online]. Available: https://www.astm.org/Standards/D638.htm

J. Lee and A. Huang, “Fatigue analysis of FDM materials”, Rapid Prototyping Journal, vol. 19, no. 4, pp. 291–299, 2013.

R. Leon, T. Ling and J. Lease. (2017). Optimizing Layer Thickness and Print Orientation of 3D Objects for Enhanced Mechanical Property using Structo 3D Printers [Online]. Available: http://docplayer.net/ 39789245-Optimizing-layer-thickness-and-print-orientation-of-3d-objects-for-enhanced-mechanical-property-using-structo-3d-printers.html

A. Garg, A. Bhattacharya and A. Batish, “Failure investigation of fused deposition modelling parts fabricated at different raster angles under tensile and flexural loading”, Journal of Engineering Manufacture, vol. 231, no. 11, pp. 2031-2039, 2016.

A.K. Sood, R.K. Ohdar and S.S. Mahapatra, “Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method”, Material Design, vol. 30, no. 10, pp. 4243–4252, 2009.

Z. Abdullah, N. Rosli, S. Maidin, M. Ghazaly and M. Ali, “The Influence of Aceton to Improve Surface Finish of 3D Printed Part for ABS and PLA Material“, International Journal of Engineering and Management, vol. 1, no. 2, pp. 8-19, 2017.

B. Rankouhi, S. Javadpour, F. Delfanian, and T. Letcher, “Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation”, Journal of Failure Analysis and Prevention, vol. 16, no. 3, pp. 467–481, 2016.

How to Cite
Abdullah, Z., Ting, H., Ali, M., Fauadi, M., Kasim, M., Hambali, A., Ghazaly, M. M., & Handoko, F. (1). THE EFFECT OF LAYER THICKNESS AND RASTER ANGLES ON TENSILE STRENGTH AND FLEXURAL STRENGTH FOR FUSED DEPOSITION MODELING (FDM) PARTS. Journal of Advanced Manufacturing Technology (JAMT), 12(1(4), 147-158. Retrieved from https://jamt.utem.edu.my/jamt/article/view/4905
Section
Articles