Lean Manufacturing and Overall Equipment Efficiency (OEE) in Paper Manufacturing and Paper Products Industry
The purpose of this article is to study the relationship between lean manufacturing methods and overall equipment efficiency (OEE) in paper manufacturing and paper product industry using the one-year data (Jan 2015 - Dec 2015) of five lean manufacturing tools namely single-minute exchange of die (SMED), standardized work (SW), takt time, value stream mapping (VSM) and Kaizen. The current data, which is based on the five lean tools, is compared with the past data which is collected prior to the usage of such tools. Both current and past data are analyzed using IBM SPSS version 22 and the results show that the lean methods are able to reduce waste and increase the OEE. This empirical study gives valuable information to the paper manufacturers and paper product industry in Malaysia on the utilization of lean machines for improving quality and productivity management.
A. Karim and K. Arif‐Uz‐Zaman, “A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations,” Business Process Management Journal, vol. 19, no. 1, pp. 169–196, 2013.
M. A. Karim, A. J. R. Smith, S. K. Halgamuge and M. M. Islam, “A comparative study of manufacturing practices and performance variables,” International Journal of Production Economics, vol. 112, no. 2, pp. 841–859, 2008.
T. C. Papadopoulou and M. Özbayrak, “Leanness: experiences from the journey to date,” Journal of Manufacturing Technology Management,” vol. 16, no. 7, pp. 784–807, 2005.
R.V.B. De Souza and L.C.R. Carpinetti, “A FMEA-based approach to prioritize waste reduction in lean implementation”, International Journal of Quality & Reliability Management, vol. 31, no. 4, pp. 346–366, 2014.
A. Gurumurthy and R. Kodali, “Design of lean manufacturing systems using value stream mapping with simulation: A case study”, Journal of Manufacturing Technology Management, vol. 22, no. 4, pp. 444–473, 2011.
J. P. Womack, D. T. Jones and D. Roos, The Machine that Changed the World: The Story of Lean Production. New York: Macmillan Publishing Company, 1990.
R. J. Schonberger, “Japanese production management: An evolution-With mixed success”, Journal of Operations Management, vol. 25, no. 2, pp. 403–419, 2007.
Kaizen Institute. (2016). Single Minute Exchange of Die (SMED) [Online]. Available: https://www.kaizen.com/knowledge-center/smed.html.
B. Singh, S. K. Garg, S. K. Sharma and C. Grewal, “Lean implementation and its benefits to production industry”, International Journal of Lean Six Sigma, vol. 1, no. 2, pp. 157–168, 2010.
M. A. Almomani, M. Aladeemy, A. Abdelhadi and A. Mumani, “A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques”, Computers and Industrial Engineering, vol. 66, no. 2, pp. 461–469, 2013.
A. Berger, “Continuous improvement and kaizen: standardization and organizational designs”, Integrated Manufacturing Systems, vol. 8, no. 2, pp. 110–117, 1997.
H. M. Wee and S. Wu, “Lean supply chain and its effect on product cost and quality: a case study on Ford Motor Company”, Supply Chain Management: An International Journal, vol. 14, no. 5, pp. 335–341, 2009.
M. Rother and J. Shook, “Learning to See Value Stream Mapping to Create Value and Eliminate Muda”, Lean Enterprise Institute Brookline, pp. 102, 2003.
A.R. Rahani and M. Ashraf, “Production Flow Analysis through Value Stream Mapping: A Lean Manufacturing Process Case Study”, Procedia Engineering, vol. 41, pp. 1727–1734, 2012.
A. Zuashkiani, H. Rahmandad and A. K. S. Jardine, “Mapping the dynamics of overall equipment effectiveness to enhance asset management practices”, Journal of Quality in Maintenance Engineering, vol. 17, no. 1, pp. 74–92, 2011.
S. F. Fam, S. L. Loh, H. Musa, L. M. S. Khoo and D. H. Y. Yong, “Overall Equipment Efficiency (OEE) Enhancement in Manufacture of Electronic Components & Boards Industry through Total Productive Maintenance Practise”, in MATEC Web of Conference, vol. 150, no. 05037, 2018, pp. 1-5.
M. Braglia, M. Frosolini and F. Zammori, “Overall equipment effectiveness of a manufacturing line (OEEML): An integrated approach to assess systems performance”, Journal of Manufacturing Technology Management, vol. 20, no. 1, pp. 8–29, 2009.
H. D. Wan and F. F. Chen, “Decision support for lean practitioners: A web-based adaptive assessment approach”, Computers in Industry, vol. 60, no. 4, pp. 277–283, 2009.
Authors who publish with this journal agree to the following terms:
- Authors transfer copyright to the publisher as part of a journal publishing agreement with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after the manuscript is accepted, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).