Design for Manufacture And Assembly Analysis of Baby Stroller

  • M.H.A. Rahman
  • N.A. Maidin
  • M.N. Ahmad
  • M.H. Osman
  • M.K. Wahid
  • A.N.M. Ruslan


This paper presents the study design analysis for manufacture and assembly (DFMA) of a baby stroller (Sweet Cherry SCR8 Series) in the aspect of part for manufacturing, assembly process and also handling and insertion difficulties. The problem identified in this study is on the features of the stroller that show a lot of fastener being used and also the usage of both hands in moving the fold latch to fold the stroller. The study has proven to save assembly time by 452.29s which is 23% more efficient than the original design. The number of parts reduced from 179 parts to be 149 parts. The DFA index is also improved from 9.6 to 12.6. The advantages of using DFMA method has been proved in the redesign of the baby stroller. Lastly, the analyzed results are discussed at the end of this research.


Download data is not yet available.


J.F. Greany and K.A. Greany, “The fitness benefits of pushing a baby stroller outdoors,” Journal of Cardiopulmonary Rehabilitation and Prevention, vol. 30, no. 4. pp. 103-107, 2013.

D.A. Gregory. K.A. Pfeiffer, K.E. Vickers, A.J. Aubrey, J.I. Flynn, C.P. Connolly and D.P. Coe, “Physiologic responses to running with a jogging stroller,” International Journal of Sports Medicine, vol. 33, no. 9, pp. 711–715, 2012.

E. Powell, E. Jovtis and R. Tanz, “Incidence and Description of Stroller-Related Injuries to Children,” Pediatrics, vol. 110, no. 5, pp. e62–e62, 2002.

A. D. Jayal, F. Badurdeen, O. W. Dillon and I. S. Jawahir, “Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels,” CIRP Journal of Manufacturing Science and Technology, vol. 2, no. 3, pp. 144–152, 2010.

K. G. Swift and J. D. Booker, Manufacturing Process Selection Handbook. United Kingdom: Butterworth-Heinemann, 2013.

S. M. Afazov, “Modelling and simulation of manufacturing process chains,” CIRP Journal of Manufacturing Science and Technology, vol. 6, no. 1, pp. 70–77, 2013.

S. Mariette, M. Tavaud, U. Arunyawat, G. Capdeville, M. Millan and F. Salin, “Population Structure And Genetic Bottleneck In Sweet Cherry Estimated With SSRS And The Gametophytic Self-Incompatibility Locus,” BMC Genetetics, vol. 11, no.1, p. 77, 2010.

X. Xie, “Design for Manufacture and Assembly,” Department of Mechanical Engineering, University of Utah, no. 1, pp. 643–681, 2006.

H. J. Warnecke and R. Bäßler, “Design for Assembly — Part of the Design Process,” CIRP Annals - Manufacturing Technology, vol. 37, no. 1, pp. 1–4, 1988.

G. Boothroyd, “Product Design for Manufacture and Assembly,” Computer-Aided Design, vol. 26, no. 7, pp. 505–520, 1994.

H. W. Stoll, “Design for Manufacture: An Overview,” Applied Mechanics Reviews, vol. 39, no. 9, pp. 1356–1364, 1986.

R. Bogue, “Design for manufacture and assembly: background, capabilities and applications,” Assembly Automation, vol. 32, no. 2, pp. 112–118, 2012.

G. Boothroyd, P. Dewhurst and W. A. Knight, Product Design for Manufacture and Assembly Third Edition, Boca Raton: Taylor and Fancis Group, 2011.

I. Bettles, “Design for manufacture & assembly (DFMA) – the Boothroyd & Dewhurst approach,” in the Third International Conference on Competitive Performance Through Advanced Technology, York, 1992, pp. 316–321.

G. Chang and W. Peterson. (2010). Design for assembly in manufacturing engineering technology program: Experience and success [Online]. Available:

How to Cite
Rahman, M., Maidin, N., Ahmad, M., Osman, M., Wahid, M., & Ruslan, A. (1). Design for Manufacture And Assembly Analysis of Baby Stroller. Journal of Advanced Manufacturing Technology (JAMT), 12(1(1), 61-72. Retrieved from